ARRI DigitalGeneral CategoryTechnicalcan't type in search field, looking for time code cable wiring diagrams
Pages: [1]
« previous thread next thread »
Print
Author Topic: can't type in search field, looking for time code cable wiring diagrams  (Read 413 times)
Thomas Wright
Full Member
***
Posts: 185
« on: April 27, 2012, 02:25:05 AM »
Ahoy Alexites,

I'm trying to search the forum for the wiring of Lemo5 to bnc time code cables. I think it goes from the BNC's centre pin to the 2nd pin to the right of the key way pin if looking at the pins in the lemo connector if they're facing you. But I want to be sure.

I'm sure they've been posted here before but when I try and type in the search field the cursor doesn't appear there when clicking on the box.

Computer says no.

Any help would be greatly appreciated.

Ta
Logged

Michael Borenstein
Digital Service Manager, Arri Inc.
Administrator
Hero Member
*****
Posts: 821
« Reply #1 on: April 27, 2012, 05:52:59 AM »
Thomas,

The search box issue has been reported to the web master, but the response has been less than desirable.  We are pushing the issue again.

in the mean time, I will look for the drawing or pin out the cable I have in the office when I get there.

Regards
Mike
Logged
Michael Borenstein
Digital Service Manager, Arri Inc.

Thomas Wright
Full Member
***
Posts: 185
« Reply #2 on: April 27, 2012, 06:35:39 AM »
Ta fella, much appreciated
Logged

Michael Borenstein
Digital Service Manager, Arri Inc.
Administrator
Hero Member
*****
Posts: 821
« Reply #3 on: April 27, 2012, 10:14:40 AM »
Thomas,

The Center pin goes to pin 2 of the 5 pin lemo.

Regards
Mike
Logged
Michael Borenstein
Digital Service Manager, Arri Inc.

Pages: [1]
Print
« previous thread next thread »
Jump to: