ARRI DigitalGeneral CategoryTechnicalStatus info area blocks recorded image in Surround OFF - mode
Pages: [1]
« previous thread next thread »
Print
Author Topic: Status info area blocks recorded image in Surround OFF - mode  (Read 433 times)
Juha Kinnunen
Newbie
*
Posts: 3


WWW
« on: January 12, 2012, 04:38:29 AM »
Hello,

With these settings Monitor OUT image is blocked by Status Info bars.

Frame line 1.78  |  Monitor OUT Surround View OFF  |  Monitor OUT Status info ON

Our customer found this when they wondered why they have different framing in viewfinder and onboard monitor. There will be surprises afterwards If cinematographer is using onboard monitor for framing the shot.

This is no problem. But itīs good to be aware.

- Juha
Logged
P. Mutasen Elokuvakonepaja Oy | www.elokuvakonepaja.com

Michael Borenstein
Digital Service Manager, Arri Inc.
Administrator
Hero Member
*****
Posts: 821
« Reply #1 on: January 12, 2012, 01:31:36 PM »
Hello Juha,

Yes you are correct.  The surround view offers you 10% more image area, which allows you to place the status info outside of the actual content on the monitor.  If you turn surround view off with the status info on, you will be placing the status information inside of your frame on the monitor.

Regards
Mike
Logged
Michael Borenstein
Digital Service Manager, Arri Inc.

Pages: [1]
Print
« previous thread next thread »
Jump to: